Range Rover P38
12
ENGINE
NEW RANGE ROVER
36
REPAIR
7. Remove 2 bolts securing oil cooler to radiator
bracket.
CAUTION: The RH side of the oil cooler
has a sliding mount which allows the
cooler to expand and contact with
changes in temperature. Incorrect tightening
torque of the RH fixing will lead to cooler damage.
8. Raise oil cooler for access.
9. Disconnect lower hose. Remove ’O’ ring and
discard.
10. Plug hose and cooler.
11. Remove oil cooler.
Refit
12. Position oil cooler. Remove plugs.
13. Using new ’O’ ring, connect lower hose to oil
cooler. Tighten to
30 Nm (22 lbf.ft).
14. Lower cooler to radiator bracket.
15. Apply Loctite 270 Stud Lock to threads of RH
fixing.
16. Assemble spacers to fixing and secure fixing to
radiator bracket, finger tight.
17. Engage slot in RH side of cooler to spacers.
18. RH fixing Tighten to
5 Nm (4 lbf.ft).
LH fixing Tighten to 25 Nm (19 lbf.ft).
19. Using new ’O’ ring, connect upper pipe to oil
cooler. Tighten to
30 Nm (22 lbf.ft)
20. Remove container.
21. Secure fog lamp breather tubes to radiator
bracket clips.
22. Fit deflector panel. Secure with studs.
23. Fit intercooler.
See FUEL SYSTEM, Repair.
24. Check engine oil level. Top-up if necessary.