DTC
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- On-Board Diagnostic (ABS) › DTC
BrakesDTC
C1155
(open circuit) system RR ABS wheel-speed sensor
C1165
(open circuit) system
DTC
LR ABS wheel-speed sensor
C1175
(open circuit) system
DETECTION CONDITION
- Open circuit or short to ground has been detected in the ABS wheel-speed sensor wiring harness on any of the four vehicle wheels.
POSSIBLE CAUSE
- Open circuit or short to ground in the wiring harness between the following ABS HU/CM terminal and the ABS wheel-speed sensor terminal:
- ABS HU/CM terminal M-RF ABS wheel-speed sensor terminal A
- ABS HU/CM terminal O-RF ABS wheel-speed sensor terminal B
- ABS HU/CM terminal F-LF ABS wheel-speed sensor terminal A
- ABS HU/CM terminal E-LF ABS wheel-speed sensor terminal B
- ABS HU/CM terminal I-RR ABS wheel-speed sensor terminal A
- ABS HU/CM terminal L-RR ABS wheel-speed sensor terminal B
- ABS HU/CM terminal G-LR ABS wheel-speed sensor terminal A
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.