Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)07 · Brakes
07 · Brakes

Diagnostic procedure

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
On-Board Diagnostic (ABS) › Diagnostic procedure
BrakesDiagnostic procedure · page 1 of 2
  • ABS HU/CM terminal H-LR ABS wheel-speed sensor terminal B
  • ABS wheel-speed sensor malfunction
  • Poor connection at connectors (female terminal)
BRAKES – On-Board Diagnostic (ABS) – figure

DIAGNOSTIC PROCEDURE

DTC C1145, C1155, C1165, C1175 DIAGNOSTIC PROCEDURE TABLE

STEPINSPECTIONACTION
YesGo to Step 3.
1
INSPECT PID TO
VERIFY THAT WHEEL
SPEED-SIGNALS ARE
TRANSMITTED FROM
ABS WHEEL - SPEED
SENSOR USING M-MDS
Turn the ignition
switch off.
Connect the M-MDS
to the DLC-2.
Select the following
PIDs using the M-
MDS:
LF_WSPD

No

Go to the next step.

LR_WSPD

RF_WSPD

RR_WSPD

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.