Diagnostic procedure
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- On-Board Diagnostic (ABS) › Diagnostic procedure
BrakesDiagnostic procedure · page 1 of 3
terminal L-RR ABS wheel-speed sensor terminal B
- ABS HU/CM terminal G-LR ABS wheel-speed sensor terminal A
- ABS HU/CM terminal H-LR ABS wheel-speed sensor terminal B
- ABS wheel-speed sensor malfunction
- Poor connection at connectors (female terminal)
DIAGNOSTIC PROCEDURE
DTC C1233, C1234, C1235, C1236 DIAGNOSTIC PROCEDURE TABLE
Table incomplete in source. The printed source cuts this table off at the right page edge, so some text in the last column is missing.
| STEP | INSPECTION | ACTION | |||
| 1 | INSPECT PID TO VERIFY THAT WHEEL SPEED-SIGNALS ARE TRANSMITTED FROM ABS WHEEL - SPEED SENSOR USING M-MDS • Turn the ignition switch off. | Yes | Go to Step 3. | ||
Parts & tools for this job For 2006 Mazda MX-5
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.