Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Open Circuit

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Engine Control System › Open Circuit
Engine performanceOpen Circuit
  1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION [LF] .)
  2. Inspect the following wiring harness for open or short circuit (continuity Inspection).
ENGINE PERFORMANCE – Engine Control System – figure
Fig. 23: Identifying Neutral Switch & PCM Harness Side Connectors
Courtesy of MAZDA MOTORS CORP.

Open Circuit

  • If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
  • Neutral switch terminal 2A and PCM terminal 1X

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.