Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)03 · Engine performance
03 · Engine

Open Circuit

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Engine Control System › Open Circuit
Engine performanceOpen Circuit · page 1 of 2
ENGINE PERFORMANCE – Engine Control System – figure
Fig. 42: Identifying PCM Harness Side Connector
Courtesy of MAZDA MOTORS CORP.

Open Circuit

  • If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
  • MAP/boost air temperature sensor terminal A and PCM terminal 2AV
  • MAP/boost air temperature sensor terminal C and PCM terminal 2AU
  • MAP/boost air temperature sensor terminal D and PCM terminal 2AG

Short Circuit

  • If there is continuity, there is a short circuit. Repair or replace the wiring harness.
  • MAP/boost air temperature sensor terminal A and power supply.
  • MAP/boost air temperature sensor terminal C and body ground.
  • MAP/boost air temperature sensor terminal D and power supply.
  • MAP/boost air temperature sensor terminal D and body ground.

THROTTLE POSITION (TP) SENSOR INSPECTION [LF]

CAUTION: This inspection procedure cannot be completed correctly if the accelerator pedal position sensor has a malfunction. Before performing this procedure, verify that any one of the DTCs related to

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.