Open Circuit
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Engine Control System › Open Circuit
Engine performanceOpen Circuit
Courtesy of MAZDA MOTORS CORP.
Open Circuit
- If there is no continuity in the following wiring harnesses, there is an open circuit. Repair or replace the wiring harness.
- Front HO2S terminal A and PCM terminal 2AD
- Front HO2S terminal B and PCM terminal 2Z
- Front HO2S terminal C ignition relay
- Front HO2S terminal D and PCM terminal 2BG
Short Circuit
- If there is continuity in the following wiring harnesses, there is a short circuit. Repair or replace the wiring harness.
- Front HO2S terminal A and power supply
- Front HO2S terminal A and body ground
- Front HO2S terminal B and power supply
- Front HO2S terminal B and body ground
- Front HO2S terminal C and body ground
- Front HO2S terminal D and power supply
- Front HO2S terminal D and body ground
Parts & tools for this job For 2006 Mazda MX-5
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
As an Amazon Associate we earn from qualifying purchases.