Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)22 · Electrical
22 · Electrical

Hazard warning lamp switch

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Repairs › Hazard warning lamp switch
ElectricalHazard warning lamp switch
Diagram
  1. Release dimmer resistor from instrument cowl.
  2. Disconnect multiplug from dimmer.

Refit

  1. Connect multiplug and engage dimmer to cowl.
  2. Position fuse box cover and secure with clips.

HAZARD WARNING LAMP SWITCH

Service repair no - 86.65.50

Remove

  1. Release radio from console. See this section.
Hazard warning lamp switch – Release radio from console. See this section.
  1. Release hazard warning lamp switch from console.
  2. Disconnect multiplug from switch.

Refit

  1. Connect multiplug and engage switch to console.
  2. Secure radio to console. See this section.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.