Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)05 · Engine (K Series)
05 · Engine

Cover - timing belt lower front

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Repairs › Cover - timing belt lower front
Engine (K Series)Cover - timing belt lower front

COVER - TIMING BELT LOWER FRONT

Service repair no - 12.65.43

Remove

  1. Disconnect battery earth lead.
  2. Remove timing belt upper front cover. See this section.
  3. Remove crankshaft pulley. See this section.
Cover - timing belt lower front – Remove crankshaft pulley. See this section.
  1. Remove 3 bolts securing lower front cover.
  2. Remove lower cover.

Refit

  1. Fit lower cover and tighten bolts to 9 Nm.
  2. Fit crankshaft pulley. See this section.
  3. Fit timing belt upper front cover. See this section.
  4. Connect battery earth lead.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.