Workshop Manuals Factory service & repair Nissan and Datsun
01 cover02 A (intro)03 B (CA18DET/ECCS)04 C (driveline)05 D (body & frame)06 E (interior electric)07 F (misc. codes)08 manual notes09 Front cover10 CONTENTS11 GI General information12 MA maintenance13 EM engine mechanical14 LC lubrication & cooling15 EF &EC engine fuel & emission control system16 FE engine control fuel & exhaust systems17 CL clutch18 MT manual transmission19 AT automatic transmission20 PD prop shaft & diff carrier21 FA front axle & suspension22 RA rear axle & suspension23 BR brake system24 ST steering25 BF body26 HA heater & aircon27 EL electrical system
Nissan and Datsun Nissan 180SX S13 1989 Workshop Manual26 · HA heater & aircon
26 · General

A/C PERFORMANCE TEST - Nissan 180SX S13 Workshop Manual

Make
Nissan and Datsun
Model
180SX Nissan 180SX S13 1989 Workshop Manual
Section
General › A/C PERFORMANCE TEST - Nissan 180SX S13 Workshop Manual
HA heater & airconA/C PERFORMANCE TEST - Nissan 180SX S13 Workshop Manual

A/C PERFORMANCE TEST

A/C PERFORMANCE TEST

Performance Test Diagnoses Characteristics revealed by the manifold gauge in the following table, the portion smeared with readings for the air conditioning system are shown ink on each gauge scale indicates the range showing in the following. that the air conditioning system is in good order. For how to do the performance test, refer to the This range is described in Performance Chart. item ‘‘Performance Chart”.

ConditionProbable causeCorrective action
INSUFFICIENT REFRIGERANT CHARGE
Insufficient cooling.Refrigerant is low, or1. Leak test.
Bubbles appear in sightleaking slightly.2, Repair teak. 3. Charge system.
glass.3. Charge system.
Evacuate, as necessary, and
ACIB2ZArecharge system.
ALMosT NO REFRIGERANT |Stop compressor immedi-
ately.
No cooling action.Serious refrigerant leak.1, Leak test.
A lot of bubbles or2. Discharge system, 3. R
something like mist3. Repair leak(s). 4, Replace receiver drier if
appears in sight glass.4, Replace receiver drier if
necessary.
. Check oil level, on
6. Evacuate and recharge
ACI53Asystem.
MALFUNCTIONING EXPANSION VALVE
Slight cooling.Expansion valve restrictsIf valve inlet reveals sweat
Sweat or frosting onrefrigerant flow, ® Expansion valve isor frost: 1. Discharge system.
expansion valve inlet.®Expansion valve is clogged.1. Discharge system. 2. Remove valve and clean
clogged.2. Remove valve and clean
®Expansion valve is in-it. Replace it if necessary.
operative.3. Evacuate system.
Valve stuck closed.4. Charge system,
Thermal bulb has lost charge.If valve Goes not operate:
lost charge.1. Discharge system.
2. Replace valve.
3. Evacuate and charge
AC354Aa,system.

HA-35

Parts & tools for this job For Nissan 180SX

As an Amazon Associate we earn from qualifying purchases.