TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 2 (Cont'd)
[0] 4 @ Reconnect push control unit and Push control unit mode door motor harness con-
connector e)
nectors. 8
N.G Replace control amp. built-in
CHECK FOR OUTPUT OF
+
PUSH CONTROL UNIT.
push control unit. Do approx. 12 volts exist be- tween push control unit harness terminal No. @) and (8) when Push control unit connector
GIv V4
)
mode is switched fram “VENT”
: . L 7] | H| F
switched from “DEF” to
=f iS) | to “DEF” or when mode is “VENT? G f( Terminal Mode door motor No. Direction Mode door RHA4SI2ZA
@ ® operation
of linkage rotation © © Stop Stop L.H.D. model: Clock- re) @) VENT wise > DEF R.H.D. model: Counter- clockwise L.H.D. model: Counter- @® e) DEF clockwise > VENT R.H.D. model: Clock- wise
O.K. ¥v Replace mode door motor.
HA-73
Parts & tools for this job For Nissan 180SX
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Nissan 180SX cabin filter
As an Amazon Associate we earn from qualifying purchases.