TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › TROUBLE DIAGNOSES - Nissan 180SX S13 Workshop Manual
TROUBLE DIAGNOSES
TROUBLE DIAGNOSES
Diagnostic Procedure 4
Compressor (is) 4: L.H.D. connector (Fz) 4: R.HD.
SYMPTOM: Magnet clutch does not operate with A/C switch
i ad 3 and fan switch are ON. @ Perform PRELIMINARY CHECK 2 before referring to the following flow chart. @ 1 ©
CHECK POWER SUPPLY
N.G.
FOR COMPRESSOR.
! gp Disconnect compressor harness RHA4164 connector, Do approx. 12 volts exist be- Thermal protector C0) -2: LHD. {Go to next page.) tween compressor harness ter- connector
DISCONNECT (Fs) “2: RLHD.
BM € minal No. @2 and body ground? O.K. 1B} ———-, N.G.
CHECK THERMAL
Replace thermal protector. PROTECTOR. Disconnect thermal protector harness connector. Does continuity exist between thermal protector harness
- RHAAITA
terminal No. ® and body ground? O.K. Vv Check magnet clutch coil. N.G, q Replace magnet clutch.
HA-75
Parts & tools for this job For Nissan 180SX
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Nissan 180SX cabin filter
As an Amazon Associate we earn from qualifying purchases.