bearing & race, 0.D, thrust washer - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › bearing & race, 0.D, thrust washer - Nissan 200SX S12 Workshop Manual
bearing & race, 0.D, thrust washer
ASSEMBLY
Available ©.D. thrust washer
| Thickrass mm {in} | Part number |
|---|---|
| 1,3 (0.051) | 31628-X8607 |
| 1.5 (0.069) | 31828-X8605 |
| 1.7 (0.067) | 31828-X8608 |
| 1.9 (0.075) | 31528-X8800 |
| 2.1 (0.083) | 31828-X8601 |
| 2.3 (0,081) | 31528-X8602 |
| 2.5 (0,088) | 31528-X8603 |
| 2.7 10.106) | 31528-X8604 |
27. Lubricste 0.D, servo O-rings, then install 0.D. band servo, brake band end band strut.
©.D. total end play
0.D, total ond play = [G — 0.1 mm {0.004 in}) -(F-¥) Specified 0.D. total end play: 0,25 - 0.60 mm (0,0098 - 0.0197 in)
0.D. total end play can be adjusted with 0,0. bearing race, ‘Available 0D. beering races
| Thickness mo (in) | Part number |
|---|---|
| 1.2 (0,047) | 31866-X8600 |
| 1.4 (0.056) | 91558-8601 |
| 1.6 (0.063) | 31666-8602 |
| 1.8 (0,071) | 31656-X8603 |
| 2.0 (0.079) | 31866-X8604 |
| 2.2 (0.887) | 31558-XBB05 |
Brake band saree
28. Lubricage seal ring of drum support, then install
bearing & race, 0.D, thrust washer
and 0.D. pack on drum support, Make sure that brake band strut is correctly installed,
0.0. peck 26, Adjust 2nd brake band, Tighten piston stem to Beorieg - the specified value. Back off three full turns and secure with tock nut. Seat ring
‘Thruse washer sara
AT-52
Parts & tools for this job For Nissan 200SX
As an Amazon Associate we earn from qualifying purchases.