Workshop Manuals Factory service & repair Nissan and Datsun
01 Nissan-S110 S12 S13 S14 S15 Silvia 200SX 240SX02 INDEX03 GI - General Information04 MA - Maintenance05 EM - Engine Mechanical06 LC - Engine Lubrication & Cooling07 EF&EC - Fuel & Emission Control08 FE - Engine Control, Fuel & Exaust09 CL - Clutch10 MT - Manual Transmission11 AT - Automatic Transmission12 PD - Propeller Shaft & Differential13 FA - Front Axle & Suspension14 RA - Rear Axle & Suspension15 BR - Brake System16 ST - Steering System17 BF - Body18 HA - Heater & Air Conditioner19 EL - Electrical System20 Inch/Metric Converion Tables21 Quick Reference Chart
Nissan and Datsun Nissan 200SX S12 1986 Workshop Manual11 · AT - Automatic Transmission
11 · Transmission

TROUBLE-SHOOTING AND DIAGNOSES - Nissan 200SX S12 Workshop Manual

Make
Nissan and Datsun
Model
200SX Nissan 200SX S12 1986 Workshop Manual
Section
General › TROUBLE-SHOOTING AND DIAGNOSES - Nissan 200SX S12 Workshop Manual
AT - Automatic TransmissionTROUBLE-SHOOTING AND DIAGNOSES - Nissan 200SX S12 Workshop Manual

TROUBLE-SHOOTING AND DIAGNOSES

1986-s12_manual: diagram

TROUBLE-SHOOTING AND DIAGNOSES

inspection of Lock-up Gontrol {Cont‘d).

INSPECTION POINTS

Inspection itemItem te be checkedChacking method
Connect tester to control unit connector terminals Nos. 3 and
5 and check lock-up sigrials while running vehicie with partly
Loopen throttle and O.D. control switch ON. ®
Look-up signals® Check if lock-up solenoid is ON when vehicle speed is above 78 km/h (48 MPH).
78 km/h (48 MPH).
© Check if lock-up solenoid is OFF when vehiele speed is
below 73 km/h (45 MPH),
Wires for output signalsCheek if connector between control unit and lock-up solenoid is propery connected. Alto, check cannetor for cogtinuity.
Lock-up solenoid© Check if O-ring is installed to tip of solenoid, © Check operation of solenoid by app
Lock-up solenoid© Check operation of solenoid by applying 12V voltage,
Check it connections are properly made between control unit a
Wires for input signalsand following sensors. Also, check connectors for conduction. © Vehicle speed sensor
input signals© Vehicle speed sensor B © E
© E.F.l, contro} unit connector terminal No, 13
Input signalsCheck iter given on inspection-4 in flow chart on page AT-68.

AT-70

Parts & tools for this job For Nissan 200SX

As an Amazon Associate we earn from qualifying purchases.