serve sooty - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › serve sooty - Nissan 200SX S12 Workshop Manual
serve sooty
ASSEMBLY
Air check point baie.
serve sooty
|. overnae ees (Fram Rear clutch, (| ai —o hematin ae oe *
SATse6
37. Check that parking pawl, pin, spring and 1 40mm (1.57 in) washer are assembled correctly. 2 35.mm (1.380)
3. 25mm (0.98 in} After installing control valve to transmission case, make sure that control lever can be moved to al positions.
40. Before installing vacuum diaphragm valve, measure depth of hole in which it is inserted, This measurement determines correct rod length to ensure proper performance. Tranamianion Véousr capi
‘Note vested
valve body
Cane wal
/ / 38, Install rear extension. F:
39. Install control valve assembly. Be sure manual ~ valve is in alignment with selector pin, Tighten control valve body attaching bolts. Securing bolt comes in three different lengths, ‘Varaum throttte valve Diaphragm rod Valve body side plate sarore
AT-54
Parts & tools for this job For Nissan 200SX
- PARTTransmission filter kitSearch: Nissan 200SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.