REPAIR FOR COMPONENT PARTS - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 200SX S12 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Oil Pump (Cont'd)
Drum Support ASSEMBLY DISASSEMBLY 1, Install lock-up contro! valve and spring into oil 1, Remove drum support and gasket from 0.D, pump cover, then tap new retaining pin.
2. Mount pump housing in Tool and suitable spacer, Set up pump housing with inner and outer pump gears on it and install pump cover to pump housing. Temporarily assemble oil pump.
He satay tdi
2. Stake off retaining pin with a punch fouter s¥25690001 ml dia. 1.5 to 1.8 mm (0.059 to 0.071 in)}, then remove 0.D. cancel valve and spring, 1 =F Specer (Thickrvam 20 rm (0.79 int) sarsao Don’t stake it off from contacting face side, Retaining pina,
3. Set the cover to within the run-out of the
oo, ny
specified total indicator reading. Total indicator reading: Loss than 0.07 mm {0,0028 in}
SATS) 4, Tighton pump securing bolts to the specitied torque. Recheck run-out.
AT-26
Parts & tools for this job For Nissan 200SX
- PARTTransmission filter kitSearch: Nissan 200SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.