i pas - Nissan 200SX S12 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 200SX Nissan 200SX S12 1986 Workshop Manual
- Section
- General › i pas - Nissan 200SX S12 Workshop Manual
i pas
ASSEMBLY
21,Mount drum support gasket @ on drum support after coating with vaseline. Apply A.T.F. to O-ring of drum support, Align drum support with ©.D. case to transmission case and install. dentifleation palet of gasket
satons
25. Adjust 0.0. end play.
i pas
erwon oll pump Baten drum support ond 0.0. cow @) ‘0 trenminion cow (&) ‘oarez4 22, Apply A.T.F. to O-ring of drum support, then instal! drum support and O.D, case, Before installing drum support end O.D. cata on ‘transmission case, ensure that they have beon centered property. Refer to Component Parts for Drum Support.
0.0. one
23. Temporarily tighten O.D. case with two con-
A Trust washer Teanaminion cme Znaadie = bern verter housing securing bolts. @: 0.0. pack ane piay ‘Specer [18mm (0.69 In) thiekl @: 00. total one pny aren ©.D. pack end play 1) Assemble direct clutch assembly, O.D. plane tary gear set and connecting drum, and instal them on O.D. pack.
RETA contin um THA cave
0.0. sun gear sats74 24, Insert intermediate shaft. ©.D. internal geet Dirser efuten Be careful of shaft direction, assembly,
aren’
AT-50
Parts & tools for this job For Nissan 200SX
- PARTTransmission filter kitSearch: Nissan 200SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.