Front lower arm bushing replacement (page 5 of 8)

• A Damper mounting washer
• B Damper mounting rubber
• C Damper mounting collar
• D Damper spring
• E Bump stop plate
• F Bump stop
• G Damper unit
• H 10 mm Nut
• I Socket wrench
• J Dust cover
• K Spring mounting rubber
• L Damper mounting rubber
• M Damper mounting base
• N Self – locking nut

WARNING: The front and rear dampers contain nitrogen gas and oil under pressure. The pressure must be relieved before disposal to prevent explosion and possible injury when scrapping.

CAUTION: Replace self – locking nuts after removal.

• Check damper mounting washer for weakness.
• Check damper spring for weakened compression or damage
• Check bump stop and mounting rubbers for weakness, cracks or damage.
• Check damper unit for rust, oil leaks and smooth operation through a full stroke in both directions.