Workshop Manuals Factory service & repair Rover
Rover 800 Workshop Manual (1996-1999)14 · Clutch
14 · Transmission

Clutch hydraulic system - bleed

Make
Rover
Model
800 Workshop Manual
Year
1996–1999
Section
Adjustments › Clutch hydraulic system - bleed
ClutchClutch hydraulic system - bleed

CLUTCH HYDRAULIC SYSTEM - BLEED

Service repair no - 33.15.01

Clutch hydraulic system - bleed – Service repair no - 33.15.01
  1. Remove filler cap and top-up reservoir. See INFORMATION, Capacities, fluids and lubricants.

CAUTION: Do not allow brake fluid to contact paint finished surfaces as paint may be damaged. If spilled, remove fluid and clean area with clean warm water.

Clutch hydraulic system - bleed – Remove filler cap and top-up reservoir. See INFORMATION, Capacities, fluids and lubricants
  1. Connect tube to bleed screw on slave cylinder and loosen bleed screw.
  2. Pump clutch pedal through its full stroke until air free fluid flows.
  3. Tighten bleed screw and remove bleed tube.
  4. Check fluid level and top-up if necessary.

Parts & tools for this job For 1996 Rover 800

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.