Engine coolant temperature sensor - r r

Operation 1060G14 · Pressure pump electric control

1.9 JTD 8V

Removing

- 5530B10 battery - r+r

Disconnect the battery negative terminal.

1. Disconnect the water temperature sensor electrical connection.

2. Undo the thermostat water temperatur sensor and remove.

Refitting

Tighten the coolant temperature sensor into the threaded seat on the thermostat.

Connect the electrical connector.

Connect the battery negative terminal.

- 5530B10 battery - r+r

1.9 JTD 16V

Removing

Proceed with removal - 7025A12 Engine front sound insulation COVER - R.R..

Proceed with removal - 7025A14 Bonnet LID - R.R..

Proceed with removal - 1016A10 sound-proofing cover - r + r.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

1. Disconnect the electrical connection from the engine coolant temperature sensor.

2. Undo and remove the engine coolant temperature sensor.

Refitting

Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.

Connect the electrical connection to the engine coolant temperature sensor.

Connect the negative (-) battery terminal.

Proceed with refitting - 1016A10 sound-proofing cover - r + r.

Proceed with refitting - 7025A14 Bonnet LID - R.R..

Proceed with refitting - 7025A12 Engine front sound insulation COVER - R.R..