Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Adjusting digital clock

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › Adjusting digital clock
55 Electrical systemAdjusting digital clock
Diagram of the integrated stereo radio unit showing the digital display and control buttons, with callout letters A through H identifying specific components.

F. Hours G. Flashing colon H. Minutes

ADJUSTING DIGITAL CLOCK

To adjust the clock, carry out the following operations in the order stated:

  • Press the E button for more than two seconds until the letter M accompanied by the number 1 or 2 is displayed on the left of the display.
  • To adjust the hours (F) press the buttons A and B (which increase or decrease the number).
  • To adjust the minutes (H) press the buttons C and D (which increase or decrease the number).
  • Press the E button again to memorize the new time, which will also be visible when the car is stopped with the radio off, with the colon (G) flashing.
TECHNICAL CHARACTERISTICS
No. of output channels2
Musical output powerAbout 8W peak
(per channel)
Nominal output power≤ at 4W RMS
Load impedance4 Ohm
Photograph showing a hand using tool 1860897000 to lift the flap of the radio unit for removal from the dashboard.

REMOVING-REFITTING RADIO

Fit tool 1860897000 as shown in the figure, then lift the flap for inserting the cassette and withdraw the radio from its seating.
After disconnecting the electrical connections from the rear, remove the radio from the car.

Line drawing of tool 1860897000, showing two U-shaped metal release keys.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.