Fader, loudness and mute functions

FADER, LOUDNESS AND MUTE FUNCTIONS

Radio equipment

• press the "AUDIO +" switch (21) to emphasize the sound coming from the rear speakers or the "AUDIO -" switch (19) to emphasize the sound coming from the front speakers and the Fader levels will appear on the display (F = front; R = rear);
• by pressing the switchs briefly, it is possible to change gradually in steps;
• by pressing them for longer, it is possible to change quickly;

NOTE The "FAD F" and "FAD R" values which can be set are between 0 and 15.

• by pressing the "AUDIO +" and "AUDIO -" switches at the same time the adjustment in the central position is selected and the display shows the zeroed Fader level (see diagram at the foot of the previous page).

LOUDNESS FUNCTION

• Press the "LOUD" switch (18) to activate / de-activate this function which makes it possible to emphasize the bass whilst listening. If the function is activated, the LED under the switch comes on and the word "LOUD" appears on the display.

MUTE FUNCTION

• Press the "MUTE" swith (26) to activate / deactivate this function. If the function is activated, the radio does not send any signal to the speakers and the word "MUTE" appears on the display.