Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Removing-refitting speakers

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › Removing-refitting speakers
55 Electrical systemRemoving-refitting speakers
Diagram showing the protective grille on the dashboard with an arrow indicating a point for prying.

REMOVING-REFITTING SPEAKERS

Speakers in dashboard

  1. Remove the protective grille from the dashboard using a screwdriver at the point shown by the arrow.
  2. Undo the bolts fixing the speaker to the dashboard.
  3. Disconnect the electrical connection and remove the Speaker from the vehicle.

Rear speaker

  1. Undo the bolts fixing the speaker, and remove it from the vehicle after having disconnected the electrical connection for the supply cables.
Diagram showing the speaker mounted in the dashboard with arrows pointing to the fixing bolts.
Diagram showing the rear of the speaker with the electrical connector being disconnected.
Diagram showing a rear speaker mounted in the vehicle body with arrows pointing to the fixing bolts.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.