Radio equipment

Radio equipment

55.

If you wish to search for other stations, press the "MODE -" (7) or "MODE +" (9) tuning switches.

To programme transmitters with the "TP" function activated, carry out the programming operations (see paragraph on "Programming a station").

As an alternative to the manual programming, by keeping the "AS" switch (13) pressed until the audio is switched off, the automatic programming will be carried out (see paragraph on "Automatic programming on RDS2 band - Autostore")

Point b)

If you wish to receive traffic information, before putting in the tape or the compact disc, tune in to an RDS TP transmitter. If, whilst listening to the tape or compact disc, the latter transmits traffic information, the reproductionof the tape or the compact disc will temporarily be halted and resumed automatically when the message is over.

Point c)

Even when not listening to the radio it is possible to receive traffic information. After tuning in to an RDS TP transmitter and placing the volume level at zero, if traffic information is transmitted it will be heard at a pre-set minimum volume.

In certain countries there are radio stations that, even if the TP functionis activated, do not transmit traffic information.

Pre-setting volume level for TP function (Traffic Programme)

• Select the desired volume level using the "AUDIO -" (19) and "AUDIO +" (21) switches;
• keep the "AUDIO" switch (20) pressed until the words "TA VOL XX" appear on the display, where "XX" is the pre-set volume level;

NOTE The volume level which can be pre-set varies from 5 to 31 (max volume).

If no level or a minimum level of 5 is pre-set, then level 5 is automatically selected.