Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

CD Repetition and Random playing

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › CD Repetition and Random playing
55 Electrical systemCD Repetition and Random playing

CD Repetition and Random playing

CD Repetition (REPEAT Function)

Diagram of radio control panel showing the RPT switch labeled 11
Press the "RPT" switch (11) (the LED under the switch will come on) to listen several times to the last compact disc played.

NOTE If in the meantime another compact disc is selected, whilst remaining in the CD repeat mode, it will be played again several times.

- press the "RPT" switch (11) again (the LED under the switch will go out) to exit from this mode.

Random playing of tracks (RRANDOM Function)

Diagram of radio control panel showing the RND switch labeled 12
If the "RND" switch (12) is pressed (the LED under the switch will come on) a compact disc from those present in the loader will be selected at random and all the tracks on this compact disc will be played at random. Once all the tracks have been played, another compact disc is selected and so on. Once all the discs have been heard, the random playing starts again in the same way.

NOTE If the "CD Repeat" mode has been selected previously, all the tracks on the disc selected are played at random.

- press the "RND" switch (12) again (the LED under the switch will go out) to exit from the "Random playing" mode.

Never expose discs to heat or direct sunlight, they must be stored in an appropriate container after use.
Compact discs should be kept away from dust and you should never touch the surface of the discs with your fingers and care should be taken to ensure they are not scratched as this will affect the sound reproduction.
If the surfaces of a disc is dirty, it should be cleaned with a soft cloth, working from the centre outwards. Do not insert damaged or distorted discs into the loader.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.