Dolby B Function

Dolby B Function

Press switch (17) to activate / deactivate the Dolby B function (device for limiting the noise produced under licence by the "Dolby Laboratories Licensing Corporation") (*). When the Dolby function is activated, the LED under the switch comes on and the appropriate symbol (illustrated in the diagram, bottom left) appears on the display.

(*) Dolby and the symbol (two Ds) are registered trade marks of the above company.

Ejecting the cassette

• Press switch (22) briefly to open the cassette housing protective flap;
• press switch (22) briefly a second time to eject the cassette.

NOTE The same result is achieved by keeping the switch (22) pressed until the cassette is ejected.

• After the tape is ejected the word "TAPE" appears on the display and the radio starts to work, tuning in to the last station listened to.

NOTE The cassette cannot be ejected with the radio off.

Never expose cassettes to heat or to direct sunlight, but always store them properly after use. It is advisable to use good quality cassettes, no longer than C-90 in order to always ensure optimum reproduction. Impurities on the head caused by tapes can result, in time, in decreased high tones during reproduction. It is therefore advisable to clean the heads periodically using a special non abrasive type head cleaning cassette.