Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Compact disc player function

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › Compact disc player function
55 Electrical systemCompact disc player function

COMPACT DISC PLAYER FUNCTION

Vehicles equipped with the AD182H radio are prepared for the fitting of a Compact Disc (CD) player with a multipolar cable which ends in the luggage compartment on the left hand side.

A kit is available from FIAT Lineaccessori FIAT which includes a Compact Disc player, an additional connecting multipolar cable and a mounting bracket for the fitting.

The player has a special loader which can hold up to 6 compact discs.

A hand holding a compact disc loader mechanism

Filling the Compact Disc loader

  • Extract a support for each compact disc that you wish to play;
  • insert the compact disc with the label or the printed section facing the support.

If the compact disc is placed incorrectly, it will not play.

A hand inserting a compact disc into the loader mechanism
Diagram showing the loader insertion path with callouts A and B, and a switch position indicator 1 and 2

Inserting loader in Compact Disc player

NOTE The player cannot play 8 cm compact discs (unless special adaptors available from Hi-Fi shops are used).

To insert the loader in the compact disc player, proceed as described below:

  • slide the flap A towards the right, as illustrated in the diagram, until it is not locked;
  • check that the switch B is in position "1";

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.