Radio equipment

Radio equipment

1. Grip both elements of tool 1860897000 and partly extrac the radio, then release the two elements of the above tool from the radio.

DO NOT extract the radio working working from the glove compartment, but only use the two elements of tool 1860897000, following the procedure described previously.

2. Protect the area of the dashboard under the radio using a cloth as illustrated in the diagram.
3. Completely extract the radio; disconnect connection D for the aerial cable and connectors A and B working in the following way: push connectors A and B towards the radio and press on the retaining springs C shown in the inset and extract them from the housing; then remove the radio from the vehicle.
   If the rubber terminal (1) for the centering pin (2) remains inserted in the dashboard cross member, remove it and fit it on the actual pin.

REMOVING RADIO MODEL AD182H

4. Follow the same procedure described for the removal of the radio model AD 182 L until the disconnection of connectors A and B, then disconnect the connector for the Compact Disc (CD) (which can be recognized by the three different colours) acting, at the same time, on the retaining springs shown in the inset.