Refitting and replacing radio models

Refitting and replacing radio models

REFITTING RADIO MODELS AD 182 L - AD 182 H

1. To refit suitably reverse the operations carried out for the removal, making sure that the rubber terminal (1) is correctly fitted on the centering pin (2). When refitting the radio in its housing, place the cloth on the cowling whilst connecting the connectors and take care to correctly match the centering pin in the housing in the dashboard; introduce the radio slowly into its housing, keeping the two lower springs suitably loaded so that when they enter the housing they do not scratch the dashboard cowling.

2. At this point press on the radio cowling as illustrated in the diagram, until the retaining springs are heard to click avoiding using force on the control switches.

REPLACING RADIO MODELS AD 182 L - AD 182 H

3. If there is a problem with the radio or a break in the protective fuse, shown in the diagram, DO NOT CARRY OUT ANY TYPE OF REPAIR AND/OR REPLACEMENT OPERATION, but proceed as illustrated below.
4. Undo the centering pin and attach it as illustrated in the diagram, then send the complete radio to the Supplier.