Clock function

CLOCK FUNCTION

This function makes it possible to display the hours and minutes.

A double point, between the hours and the minutes, flashes once a second on the display.

With the radio on, if the clock appears on the display, whilst the time is being adjusted or a display mode is being selected, the LED under the switch (15) comes on.

With the radio off, the clock is always displayed.

Display modes

When the radio is on, there are two display modes with the following features:

a) Mode 1 (M1)

The clock is displayed in place of the main messages relating to the Radio functions (reception frequency), Audio cassette (word TAPE) or Compact Disc (number of track and playing time).

When the radio is switched on or any Radio, Cassette or Compact Disc function is selected, the messages for the function selected are displayed for around 10 seconds, after which the clock reappears.

a) Mode 2 (M2)

The messages relating to the Radio, Cassette or Compact Disc functions are displayed in place of the clock.

When the radio is switched on, the mode present before the switching off is automatically selected.

Selecting display modes

• Keep the switch (15) pressed until the double point on the display, between the hours and the minutes, stops flashing and the words "M1" or "M2" appear, depending on the display mode selected;

• press switch (5) or (6) to select display Mode 1 or Mode 2, respectively (the words "M1" or "M2", respectively will appear on the display);
• press switch (15) again briefly to confirm the selection; the double point between the hours and the minutes will start to flash again and the words "M1" or "M2" will disappear.