Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Radio equipment

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › Radio equipment
55 Electrical systemRadio equipment

Radio equipment

NOTE The functions which cannot be selected (for example cassette when it has not been switched on previously, CD where it is not fitted) are automatically excluded.

PAUSE FUNCTION

If when listening to a cassette or a compact disc another function is selected (for example the radio), the reproduction is interrupted and when returning to the "Cassette" or "Compact Disc" mode it starts again from the point where it was interrupted. If when listening to the radio another function is selected, on returning to the "Radio" mode, the last station selected is tuned into.

Diagram of radio control panel showing AUDIO switch with callout 19 pointing to minus side, callout 21 pointing to plus side, display reading VOL 6 2, and buttons LOUD, SCAN.
Diagram of radio control panel showing AUDIO switch with callout 20, display reading BASS + 6 2 and TREB - 6 2, and buttons LOUD, SCAN.

ADJUSTING THE VOLUME

  • Press the "AUDIO +" switch (21) to increase the volume and the "AUDIO -" switch (19) to decrease it;
  • by pressing the switch briefly it is possible to change gradually in steps;
  • by pressing it for longer, it is possible to change quickly and the word "VOL" appears on the display with the volume level;

ADJUSTING THE TONE

  • Press the "AUDIO" switch (20) briefly and repeatedly until the words "BASS" or "TREB" appear on the display (adjustment of Bass or Treble)
  • press the "AUDIO +" switch (21) to emphasize the bass or treble or the "AUDIO -" switch (19) to decrease them;

NOTE The "BASS" and "TREB" settings are between - 6 and + 6.

  • by pressing the switch briefly it is possible to change gradually in steps;
  • by pressing it for longer it is possible to change quickly;
  • by pressing the "AUDIO +" and "AUDIO -" switches at the same time, the adjustment in the central position is selected and the zeroed bass / treble level appears on the display.
Diagram of radio control panel showing AUDIO switch with callout 19 pointing to minus side, callout 21 pointing to plus side, display reading TREB 0 2, and buttons LOUD, SCAN.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.