Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Changing cassette side

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Radio equipment › Changing cassette side
55 Electrical systemChanging cassette side
Diagram of the radio control panel showing buttons labeled MODE, RDS, FM, AM, TP and a display reading TAPE. Callout number 8 points to the MODE button.
- in order to reproduce a cassette already inserted previously, whilst listening to the radio or a compact disc, press the "MODE" switch (8) repeatedly until the word "TAPE" appears on the display;
Diagram showing a hand pressing down on the top edge of a closed cassette housing flap. Callout number 25 points to the area above the hand where pressure should be applied.
- to close the cassette housing, press in a vertical direction at the point shown by the symbol above the hand in the diagram at the side (25) with the flap closed until the retaining spring is heard to click.
Diagram of the radio control panel showing a play/stop button and a reverse button labeled with arrows. Callout number 24 points to the reverse button. The display reads TAPE with a double arrow symbol below it.

Changing cassette side

At the end of the tape the side of the cassette is changed automatically (Autoreverse). The display shows the side of the cassette being listened to. The symbol shown by the right arrow illustrates the upper side, whilst the one shown by the left arrow indicates the lower side. To change the side of the cassette, before the end of the tape, press switch (24) (Reverse).

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.