Refitting cassette housing access flap

1. DO NOT CLOSE THE CASSETTE HOUSING ACCESS FLAP WORKING AS ILLUSTRATED IN THE DIAGRAM, in order not to cause the actual flap to become detached and cause possible damage to the guides.

Refitting cassette housing access flap

If the flap becomes detached and there is not damage to the guides or the joints, proceed with the refitting working as described below (for greater clarity the operations have been carried out with the radio not in its housing):

2. Insert the lower guides A for the flap in the sliding slots B in the radio.
3. Turn the flap making the springs C on the lower face of the actual flap coincide with the pints D for the rotating arm.
4. Simultaneously press the two sides of the flap between your thumb and index finger to complete the fitting.