Engine RPM sensor - r.r.
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Diesel injection system › Engine RPM sensor - r.r.
EngineEngine RPM sensor - r.r.
ENGINE RPM SENSOR - R.R.
Removing
- Position the vehicle on a lift.
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Disconnect the electrical connection from the engine rpm sensor.
| Description | Connector | |
|---|---|---|
| 1 | Engine rpm sensor | See K046 RPM SENSOR |
2. Undo the bolt (2a) and remove the rpm sensor (2b).
Refitting
1. Position the engine rpm sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Rpm sensor | Bolt | M6 | (engine crankcase side) 0.6 - 1.0 | 1.9 JTD 16v 1.9 JTD 8v 2.4 JTD 20v |
2. Connect the electrical connection for the engine rpm sensor.
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.