Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Croma Factory Service Manual (2005-2010)08 · Engine
08 · Engine

Injector seal test

Make
Fiat
Model
Croma Factory Service Manual
Year
2005–2010
Section
Diesel injection system › Injector seal test
EngineInjector seal test

INJECTOR SEAL TEST

Check 1060OC

1.9 JTD 8v, 1.9 JTD 16v, 2.4 JTD 20v

Disconnect the electrical connections from all the injectors.

1. Disconnect the fuel recirculation pipes from all the injectors.

INJECTOR SEAL TEST

Constrict the pipe so that no fuel comes out during the test.

Press the START/STOP and check visually that the quantity of recirculated fuel leaving the injector connections are approximately the same and small in amount

Parts & tools for this job For 2005 Fiat Croma

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.