Switch on clutch pedal - r.r. (JTD engines)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Diesel injection system › Switch on clutch pedal - r.r. (JTD engines)
EngineSwitch on clutch pedal - r.r. (JTD engines)
SWITCH ON CLUTCH PEDAL - R.R. (JTD ENGINES)
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
- Move the driver''s seat back.
- Disconnect the electrical connection from the clutch pedal switch.
| Description | Connector | |
|---|---|---|
| Switch on clutch pedal | See I031 CLUTCH PEDAL SWITCH |
- Rotate the clutch pedal switch and remove it.
Refitting
- Replace the clutch pedal switch in its housing rotating it clockwise/anti-clockwise until the retaining tooth can be heard to click in the special housing in the bracket.
- Connect the electrical connection to the clutch pedal switch.
- Connect the negative battery terminal.
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.