P0685 - main relay (actuator slip)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P0685 - main relay (actuator slip)
Fault diagnosisP0685 - main relay (actuator slip)
P0685 - MAIN RELAY (ACTUATOR SLIP)
The diagnostic equipment signals: Error P0685 (main relay), with detail "actuator slipping"
This error is detected if the main relay switches off too late or does not switch off at all. If the main relay is not switched off after the control units have been inactive for a while, a counter is activated in the engine management control unit. If the main relay is not switched off after an internally programmed period, the fault code is issued.
| 1 | Check on operation of main relay | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check that the main relay is working properly by carrying out the test See Test 1060GL CHECK ON OPERATION OF ENGINE MANAGEMENT CONTROL UNIT MAIN RELAY | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.