U1711 - can network (ncm - nca)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › U1711 - can network (ncm - nca)
Fault diagnosisU1711 - can network (ncm - nca)
U1711 - CAN NETWORK (NCM - NCA)
The diagnostic equipment signals: Error U1711 (CAN (NCM – NCA)).
This error is detected if the control module detects a fault in the automatic transmission system.
| 0 | Preliminary checks | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
| Check that there are no other errors in the engine management and automatic transmission systems using the diagnostic equipment | Move on to Step 1 | There are also other errors present | Continue according to the instructions for the diagnostic equipment for the errors present | |
| 1 | Error deletion | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Turn the ignition key to the OFF position. Wait for at least 10 secs. Delete the errrors and carry out a road test, trying to reproduce the conditions that caused the error. Check that the error does not occur again | End of diagnosis | Error U1711 is present | Replace the automatic transmission control unit and move on to Step 2 Op. 2135B52 ELECTRONIC AUTOMATIC TRANSMISSION ELECTRIC CIRCUIT -ECU MOUNT R R | |
| 2 | Correct operation check | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check the fault has disappeared | End of diagnosis | The fault persists | Replace the engine management control unit |
Parts & tools for this job For 2005 Fiat Croma
- PARTGlow plugsSearch: Fiat Croma 2005 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.