P0220 - accelerator 2 pedal
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P0220 - accelerator 2 pedal
P0220 - ACCELERATOR 2 PEDAL
The diagnostic equipment signals: Error P0220 (Accelerator pedal sensor 2).
This error is detected if, with fault code P0651 not recognized, the junction unit input voltage (Pin 31) is more than 4.67 V (positive short circuit) or less than 0.15 V (short circuit to earth or break in the circuit). As a result, the accelerator pedal does not work.
| 0 | Preliminary checks | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present:
| Move on to Step 1 | Error P0641 present | Proceed as instructed in the See Test 1060GM CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 1 | |
| 1 | Accelerator pedal check | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the accelerator pedal is working properly, carrying out the | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- PARTGlow plugsSearch: Fiat Croma 2005 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.