P2015 - flow bypass valve (feedback)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P2015 - flow bypass valve (feedback)
‹ Prev P2014 - flow bypass valve (feedback)Next › P2080 - temperature sensor on catalytic preconvertor outlet
Fault diagnosisP2015 - flow bypass valve (feedback)
P2015 - FLOW BYPASS VALVE (FEEDBACK)
The diagnostic equipment signals: Error P2015 (flow valve (feedback)).
This error is detected if the control unit recognizes a malfunction in the circuit by means of an internal evaluation logic or if there is interference with the signal for the sensor at Pin 45 of the electronic control module.
| 1 | Flow modifying solenoid valve check | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check that the flow modifying solenoid valve is working properly by carrying out the | End of diagnosis |
‹ Prev P2014 - flow bypass valve (feedback)Next › P2080 - temperature sensor on catalytic preconvertor outlet
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.