P010f - debimeter earth/air inconsistency
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P010f - debimeter earth/air inconsistency
Fault diagnosisP010f - debimeter earth/air inconsistency
P010F - DEBIMETER EARTH/AIR INCONSISTENCY
The diagnostic equipment signals: Error P010F (air mass/flow meter inconsistency).
This error is detected if the engine speed is below 50 rpm and the difference between the supercharging pressure and the barometric pressure sensor is more than 0.15 bar for at least 10 sec. As a result, the control unit carries out the calculations with a replacement value of 1.013 bar, the maximum power is reduced and the supercharging pressure can no longer be controlled.
| 1 | PRESSURE CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check the value of the atmospheric pressure, by carrying out the See Test 1060GD ATMOSPHERIC PRESSURE CHECK Check the value of the supercharging pressure, by carrying out the | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- PARTGlow plugsSearch: Fiat Croma 2005 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.