P0122 - accelerator pedal connector
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P0122 - accelerator pedal connector
P0122 - ACCELERATOR PEDAL CONNECTOR
The diagnostic equipment signals: Error P0191 (Fuel pressure signal)
This error is detected if there is interference with the signal for the sensor at Pin 43 of the electronic control module.
| 0 | PRELIMINARY CHECKS | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Connect the diagnostic equipment and select the Bosch EDC 16C39 electronic control unit, checking that none of the following errors are present: P0641 - Sensor power supply 1 P0651 - Sensor power supply 2 | Move on to Step 1 | 1. Error P0641 present | 1. Proceed as instructed in the See Test 1060GM CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 1 | |
| 2. Error P0651 present | 2. Proceed as instructed in the See Test 1060GN CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 2 | |||
| 1 | ACCELERATOR PEDAL CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check that the accelerator pedal is working properly, carrying out the | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- PARTGlow plugsSearch: Fiat Croma 2005 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.