P2008 - flow bypass valve (oc)
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P2008 - flow bypass valve (oc)
Fault diagnosisP2008 - flow bypass valve (oc)
P2008 - FLOW BYPASS VALVE (OC)
The diagnostic equipment signals: Error P2008 (flow valve), with detail "open circuit"
This error is detected if there is a break in the circuit connected to Pin 45 of the junction unit for at least 0.24 secs.
| 1 | Flow modifying solenoid valve check | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check that the flow modifying solenoid valve is working properly by carrying out the test | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- PARTEngine gasket setSearch: Fiat Croma 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.