P0697 - sensor power supply 3
- Make
- Fiat
- Model
- Croma Factory Service Manual
- Year
- 2005–2010
- Section
- Examiner - electronic diesel management › P0697 - sensor power supply 3
Fault diagnosisP0697 - sensor power supply 3
P0697 - SENSOR POWER SUPPLY 3
The diagnostic equipment signals: Error P0697 (Sensor power supply 3).
This error is detected if there is a short circuit to positive (detail "beyond the upper limit") or a short circuit to earth or a brek (detail "below the lower limit") in the circuit connected to Pin 22, or 44 of the junction unit.
| 1 | Junction unit connections check | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
|---|---|---|---|---|
Check that the engine management control unit connections are correct by carrying out the test See Test 1060GP CHECK ON ENGINE MANAGEMENT CONTROL UNIT SENSOR CONNECTIONS 3 | End of diagnosis |
Parts & tools for this job For 2005 Fiat Croma
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.