TD5 Defender
ELECTRICAL
1
REPAIR
BELT - AUXILLARY DRIVE
Service repair no - 86.10.03
Remove
1. Remove cooling fan. See COOLING SYSTEM,
Repair.
2. Release drive belt tensioner using a 15 mm ring
spanner and release belt from pulleys.
Refit
3. Clean drive belt pulley grooves and ensure
grooves are not damaged.
4. Fit new drive belt around pulleys, ensure belt is
correctly aligned in pulley grooves.
5. With assistance, hold tensioner fully clockwise
and fit drive belt around remaining pulley.
6. Fit cooling fan. See COOLING SYSTEM,
Repair.
HARNESS - INJECTORS
Service repair no - 86.70.22
Remove
1. Remove camshaft cover gasket. See ENGINE ,
Repair.
2. Disconnect engine harness from injector
harness.
3. Disconnect multiplugs from injectors.
4. Release injector harness from camshaft carrier
and remove harness.
Refit
5. Fit new ’O’ rings to injector harness connector.
6. Position harness and locate connector to
camshaft carrier.
7. Connect injector and engine harness multiplugs.
8. Fit camshaft cover gasket. See ENGINE ,
Repair.