TD5 Defender
ELECTRICAL
5
REPAIR
HEADLAMP
Service repair no - 86.40.49
Remove
1. Remove 4 screws and release side and indicator
lamps from wing.
2. Disconnect multiplugs and remove side and
indicator lamps.
3. Remove 2 screws and remove headlamp
finisher.
4. Remove 4 screws securing headlamp to wing,
disconnect multiplugs and remove headlamp.
5. Remove headlamp seal.
Refit
6. Fit headlamp seal.
7. Position headlamp, connect multiplugs, fit and
tighten headlamp screws.
8. Fit headlamp finisher and secure with screws.
9. Position side and indicator lamps, connect
multiplugs and secure with screws.
10. Reset headlamp alignment. See Adjustment.