Valve body assembly
- Make
- Land Rover
- Model
- Discovery II (NAS)
- Section
- REPAIRS › Valve body assembly
AUTOMATIC GEARBOX - ZF4HP22 - 24Valve body assembly · page 1 of 2
AUTOMATIC GEARBOX - ZF4HP22 - 24
REPAIRS
44-51
Valve body assembly
$% 44.40.01
Remove
1. Remove gearbox oil filter.
2. Remove 2 bolts securing speed sensor
harness bracket to valve body.
3. Disconnect multiplug from gearbox housing.
4. Using a 30 mm socket, remove nut securing
multiplug connector block to gearbox housing.
5. Remove 6 long bolts securing valve body to
gearbox.
6. Remove 5 short bolts securing valve body to
gearbox.
Parts & tools for this job For Land Rover Discovery
- PARTEngine gasket setSearch: Land Rover Discovery engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.