L322 Range Rover Service Procedures
BRAKES
REPAIRS
70-9
Pump - pre-charge
$% 70.25.17
Remove
1. Remove front wheel arch liner.
2. Remove nut securing alarm sounder to
mounting bracket and move aside.
3. Position container to collect fluid spillage.
CAUTION: Brake fluid will damage paint
finished surfaces. If spilled, immediately
remove fluid and clean area with water.
4. Disconnect brake pipe from master cylinder.
CAUTION: Always fit plugs to open
connections to prevent contamination.
5. Disconnect feed hose.
6. Remove bolt securing pre-charge pump
bracket to body.
7. Release pump from rubber mounting.
8. Disconnect multiplug.
9. Remove pump.
NOTE: Do not carry out further dismantling if
component is removed for access only.
M70 1158
M70 1159