L322 Range Rover Service Procedures
BRAKES
70-8
REPAIRS
Brake disc - rear
$% 70.12.33
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Remove 2 bolts securing brake caliper to hub.
Release caliper from hub and tie aside.
CAUTION: Do not allow caliper to hang on
brake hose.
4. Remove Allen screw securing brake disc to
drive flange.
5. Remove brake disc.
Refit
1. Ensure mating surfaces of disc and drive flange
are clean.
2. Fit disc to flange, fit Allen screw and tighten to
16 Nm (12 lbf.ft).
3. Position caliper to rear hub, fit bolts and tighten
to 65 Nm (48 lbf.ft).
4. Fit road wheel and tighten nuts to 140 Nm (103
lbf.ft).
5. Adjust handbrake.
6. Remove stands and lower vehicle.
M70 1146