landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Servo assembly > < Sensor - pad wear - rear
Page 538
background image

BRAKES

REPAIRS

70-21

Shoes - rear set  

$% 70.40.09

Remove

1. Raise rear of vehicle.

WARNING: Do not work on or under a 
vehicle supported only by a jack. Always 
support the vehicle on safety stands.

2. Remove road wheels.
3. Remove brake disc.

 

 + 

 BRAKES, REPAIRS, Brake disc - 

rear.

4. Remove brake shoe upper return spring.
5. Rotate brake shoe retainers 90 

°

 and remove.

6. Remove brake shoe assembly complete with 

lower spring and adjuster.

7. Remove lower return spring and adjuster from 

brake shoes.

8. Remove shoe expander.
9. Repeat procedure for other side.

Refit

1. Clean backplate and brake disc with brake 

cleaning fluid.

2. Clean expander.
3. Clean brake adjuster, lubricate threads with 

grease and set to minimum extension.
 

 + 

 CAPACITIES, FLUIDS, 

LUBRICANTS AND SEALANTS, 
Lubrication.

4. Fit expander.
5. Assemble brake shoes with adjuster and lower 

return spring.

6. Position brake shoe assembly, fit retainers and 

upper return spring.

7. Fit brake disc.

 

 + 

 BRAKES, REPAIRS, Brake disc - 

rear.

8. Repeat procedure for other side.
9. Fit rear road wheels and tighten nuts to 140 Nm 

(103 lbf.ft).

10. Adjust handbrake.

 

 + 

 BRAKES, ADJUSTMENTS, 

Handbrake adjustment.

11. Remove stands and lower vehicle.

M70 1135

M70 1142

M70 1145

Servo assembly > < Sensor - pad wear - rear